Fiber cement board equipment is also called cement fiber pressure plate equipment. It is mainly made of cement, fiber, silicon calcium materials as the main raw materials, adding certain adhesive materials, adopting the production process of copying method or flowing slurry method, and using molding machine, copying machine, press machine and other equipment to process the water mud fiber pressure plate. The cement pressure fiber board is a new type of building materials, which can be used for internal walls and external walls Body decoration, ceiling and other building use.

1. The light steel keel frame of fixed plate must be flat and stable with reliable nail holding force. Pay attention to the purchase of screws.

2. When fixing the fiber cement board, it is necessary to start from the center of the layout, and gradually fix it to the surrounding areas. In this way, the internal force caused by improper fixation of the layout can be avoided, resulting in the overall uneven surface of the board.

3. When fixing the cement fiber pressure plate with self tapping screw. The nail spacing is: the distance between the center of the nail hole and the edge of the board is 13mm-15mm, the nail head should be 0.3mm lower than the board surface; the ceiling board should be 200 mm, the middle of the wall should be 300 mm, and the surrounding should be 200 mm.

4. After each nail is fixed, the primer shall be applied on the nail head immediately to prevent the nail head from rusting and affecting the overall appearance.

5. On the fixed fiber cement board surface, draw a line according to the size slightly larger than the actual object. If it is a square hole, drill one hole at each corner of the square hole with a hole diameter of 10 mm, and then cut along the line with a portable dolomite saw. If it is a round hole, drill a hole on the inscribed circle, and then cut along the line with a curve saw. Drill the hole diameter of 10 mm and remove the burr.

Selection of inner wall panel: it can be divided into single-layer light steel keel double-sided fixed fiber cement board and double-layer light steel keel double-sided fiber-reinforced cement board fixed on the keel by staggered joints. The thickness of fiber cement board should be 8-10 mm (internal wall) and 12 mm (external wall) board, with smooth surface outward.

Purchase fiber cement board to Jiangxi ocean Willy Industrial Co., Ltd., ocean Willy is a research and development, production, sales as one of the enterprises. The company has advanced technology and strong strength, and at the same time you purchase, the company will provide you with a series of services such as installation and debugging, which is the ideal choice for you to purchase fiber cement board production line. Welcome customers to purchase.